Frequencyrange | 300kHz to3Ghz |
Max.inputlevel | MAINconnector:+40dBm(10W);AUX connector:+20dBm(100mW) |
Inputimpedance | 50Ω,VSWR:≤1.2(<2.2GHz,MAINconnector),≤1.3(>2.2GHz,AUXconnector) |
Inputconnector | N-type(MAINconnector),TNC-type(AUX connector) |
Peferenceoscillator | Frequency:10MHz
Starting characteristics:≤5*10^-8/day(after 10 minutes ofwarm-up,comparedto the frequency after 24-hour warm-up)
Aging rate:≤2*10^-8/day(0°to 50℃,compared tothe frequency after 24-hourwarm-up)
Temperature characteristics:≤5*10^-8/day(0°to 50℃,compared to the frequencyat 25℃)
External reference input:10 or 13MHz(±1 ppm),2 to5Vp-p |
Powermeter | Frequencyrang:300kHz to 3Ghz
Level range:0 to +40dBm
Measurement accuracy:±10%(after zero calibration) |
S
p
e
c
t
r
u
m
a
n
a
l
y
z
e
r
| Frequency | Frequencysetting
Setting range:0 to 3GHz(band:0),10MHz to 3GHz(band:1)*Settingresolution:1Hz
HPF:1.6 to 3GHz,On/Off
Frequency accuracy
Display accuracy:±(display frequency x reference frequencyaccuracy+spanx span accuracy)
Normal marker:Same as span accuracy
Frequency span
Setting range:0Hz,10kHz to 3GHz(band:0);0Hz,10kHz to2.99GHz(band:1)
Span accuracy:±2.5%
RBW(resolution bandwidth)
Setting range:300Hz to 1MHz(3dB BW,1-3 sequence)
Accuracy:±2%(300Hz to 300kHz),±10%(1MHz)
Selectivity(60dB:3dB):≤5:1
VBW(video bandwidth):3Hz to 100kHz(1-3 sequence),through
Sideband noise:≤-95dBc/Hz(1GHz,10kHzoffset),≤-115dBc/Hz(1Ghz,100kHz offset) |
Amplitude(atband:1) | Maximum inputlevel
Continuous average power:+40dBm(MAIN connector),+20dBm(AUXconnector)
DC voltage:0V
Average noise level(RBW:1kHz,VBW:10Hz):
≤-90dBm(MAIN connector,10MHz to 1GHz,input attenuator:20dB)
≤-90dBm+f[Ghz](MAIN connector,>1Ghz,input attenuator:0dB)
≤-110dBm+f[Ghz](AUX connector,10MHz to 1Ghz,inputattenuator:0dB)
≤-110dBm+f[GHz](AUX connector,>1GHz,input attenuator:0dB)
Residual response:≤-70dBm(MAIN connector,inputattenuator:20dB),≤-90dBm(AUXconnector,input attenuator:0dB)
Total level accuracy
MAIN connector:±1.5dB(reference level:+10.1 to +40dBm,at 0 to-50dB of referencelevel)
AUX connector:±1.5dB(reference level:-9.9 to +20dBm,at 0 to -50dBof referencelevel)
Reference level
Setting range:-60 to +50dBm(MAIN connector),-80 to +30dBm(AUXconnector)
Setting resolution:0.1dB
Accuracy:±0.5dB(MAIN connector,+10.1 to +40dBm),±1.0dB(MAINconnector,-80to -10dBm),
±0.5dB(AUX connector,-9.9 to +20dBm),±1.0dB(AUX connector,-80 to-10dBm)
RBW switching error:±0.1dB(referenced to RBW:3kHz)
Frequency response:±0.5dB[referenced to 100MHz,inputattenuator:30dB(10dBfor AUX);temperature range:18°to28℃]
Log linearity:±0.5dB(0 to -50dB,RBW:≤1MHz),±1.0dB(0 to -70dB(0 to-70dB,RBW:≤1kHz)
*10MHz to 2.2GHz,reference level:≥0dBm(MAIN connector);≥-20dBm(AUXconnector)
2nd harmonic distortion:≤-55dBc(10 to 100MHz),≤-60dBc(100 to1500MHz)*Atmixer input level:-30dBm |
Sweep | Settingrange:100ms to 1000s(frequency axis sweep),100ms to 1000s(timeaxissweep,RBW:≤1kHz),10ms to 1000s(time axis sweep,RBW:3 to10kHz);1msto 1000s(time axis sweep,RBW:≥30kHz)
Trigger switch:FREERUN,TRIGGERED
Trigger source:WIDE IF VIDEO (3 dB bandwidth:≥20MHz,triggerslope:RISE/FALL)
EXT(trigger level:TTL level,trigger slope:RISE/FALL)
Trigger delay
Setting range:0μs to 100ms;Resolution:2μs
Gate delay,gate width
Setting range:2μs to 100ms;Resolution:2μs |
Functions | Marker
Signal search:PEAK-CF,PEAK-REF
Zone marker:NORMAL,DELTA
Marker-function:MARKER-CF,MARKER-REF,ZONE-SPAN
Peak search:PEAK,,NEXT RIGHT pEAK,NEXT LEFT PEAK
Measurement
Noise power:dBm/Hz,dBm/ch
Occupied bandwidth:Power N% method,X dB down method
Adjacent channel power
Reference measurement:Total power/reference level method
Display method:Channel specified display(2 channels X 2),graphicdisplay
Average power of burst signal:Average power within the specifiedtime rangeof the time domain waveform |
Others | Number of datapoints:501
Detection mode:POS PEAK,NEG PEAK,SAMPLE
Display function:TRACE A,TRACE B,TRACE TIME
Storage funciton:NORMAL,VIEW,MAX HOLD,MINHOLD,Average,CUMULATIVE<> |
RFanalyzer | Powermeasurement(wide band)
Frequency range:300kHz to 3Ghz;Level range:0 to +40dBm(MAINconnector);Accuracy:±10%(afterzero point calibration)
Power measurement(narrow band)
Frequency range:10MHz to 3GHz
Input level:0 to +40dBm(MAIN connector),-40 to +20dBm(AUXconnector)
Accuracy:±10%(MAIN connector,after calibration with internal wideband powermeter)
±1dB(AUX connector,reference level:≥-12dBm,18°to 28℃,after calibration)
Linearity: ±0.3dB(0 to -30dB)
Freqeuncy measurement
Frequency range:10MHz to 3Ghz
Input level:-20 to +40dBm(MAIN connector),-40 to +20dBm(AUXconnector)
Resolution:1Hz
Accuracy:±(reference oscillator accuracy+10Hz) *IF frequencycounting (bandwidth:±30kHz)
FM measurement
Frequency range:10MHz to 3Ghz
Input level:-20 to +40dBm(MAIN connector),-40 to +20dBm(AUXconnector)
Deviation:0 to 20kHz
Demodulation frequency:30Hz to 20kHz
Accuracy:1% of indicated value+residual FM(demodulaitonfrequency:1kHz)
Frequency response:±0.5dB(demodulation frequency:referenced to1kHz)
Residual FM:8Hz-rms(demodulation frequency:0.3 to 3kHz)
Distortion:0.3%(demodulation frequency:1kHz,demodulationbandwidth:0.3 to3kHz,deviation:5kHz)
Filters(3dB cut-off):HPF(50Hz,300Hz),LPF(3kHz,15kHz)
φM measurement
Frequency range:10MHz to 3Ghz
Input level:-20 to +40dBm(MAIN connector),-40 to +20dBm(AUXconnector)
Deviation:0 to 10rad
Demodulation frequency :300Hz to 3kHz
Accuracy:1% of indicated value+residual φM(demodulationfrequency:1kHz)
Frequency response:±0.5dB(demodulation frequency:referenced to1kHz)
Residual φM:0.01 rad-rms (demodulation bandwidth:0.3 to 3kHz)
Distortion:0.5%(demoduation frequency:1kHz,demodulationbandwidth:0.3 to3kHz,deviation:5rad)
Filters(3dB cut-off):HPF(50Hz,300Hz),LPF(3kHz,15kHz) |
| Others | Display:ColorTFT-LCD,7.8inch,640*480dots
Hard copy:Enables data hard copy of the display through a parallelinterface(printer:ESC/Pcompatible printer).
GPIB:This instruments in specified as a device,can be controlledfrom externalcontroller(excluding power switch).
Interface functions:SH1,AH1,T6,L4,SR1,RL1,PP0,DC1,DT1,C0,E2)
Parallel interface:Conforms to the Centronics.Outputs printingdata to printer.D-sub25-pin connector(female)
RS-232C:All functions except power switch controlled by externalcontroller(baudrate:1200,2400,4800,9600bps) |
Dimensions andmass | 426(W)*221.5(H)*451(D)mm,≤22kg |
Power | 100 to 120/220to 240Vac(-15%/+10%,max.voltage:250V,automaticvoltage switchsystem),47.5 to 63Hz,≤300VA |
Operatingtemperature | 0°to50℃ |
EMC | EN55011:1991,Group 1,Class1
EN50082-1:1992
Harmonic current emissions:EN61000-3-2:1995 Class A |
Safety | EN61010-1:1993(Installation Category II,PollutionDegreeII) |